|
|
|
National Stock Number:
5307-00-787-2898
Federal Supply Class:
5307
National Item Identification Number:
007872898
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 10395468 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1018 | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 5.250 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 20 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.500 INCHES NOMINAL NUT THREAD | | 0.750 INCHES NOMINAL STUD THREAD | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.188 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.061 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM FIRST HOLE |
|
|