| MATERIAL | STEEL COMP 302 |
| MATERIAL DOCUMENT AND CLASSIFICATION | 5637 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | SILVER NUT THD |
| SILVER STUD THD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE NUT THD |
| AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE STUD THD |
| SHOULDER LENGTH | 0.170 INCHES MINIMUM AND |
| 0.190 INCHES MAXIMUM |
| NUT END SHANK LENGTH | 0.080 INCHES MINIMUM AND |
| 0.140 INCHES MAXIMUM |
| DISTANCE ACROSS FLATS | 0.430 INCHES MINIMUM AND |
| 0.439 INCHES MAXIMUM |
| OVERALL LENGTH | 1.330 INCHES MINIMUM AND |
| 1.410 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| UNF STUD THREAD |
| NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD |
| 0.250 INCHES STUD THREAD |
| THREAD CLASS | 3A NUT THREAD |
| 3A STUD THREAD |
| THREAD QUANTITY PER INCH | 28 NUT THREAD |
| 28 STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.500 INCHES MINIMUM AND |
| 0.580 INCHES MAXIMUM NUT THREAD |
| 0.520 INCHES MINIMUM AND |
| 0.560 INCHES MAXIMUM STUD THREAD |
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.730 INCHES MINIMUM AND |
| 0.770 INCHES MAXIMUM FIRST HOLE |
| COTTER PIN HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| PRECIOUS MATERIAL AND LOCATION | STUD THREAD SILVER |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 07482 |
| DESIGN CONTROL REFERENCE | 336C355P12 |