|
|
|
National Stock Number:
5307-00-813-4590
Federal Supply Class:
5307
National Item Identification Number:
008134590
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| MS75009 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS75009-10 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| OVERALL LENGTH | 4.250 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.164 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.164 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM AND CHROMATE AND ZINC OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD LENGTH | 1.750 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 1.750 INCHES MINIMUM STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD QUANTITY PER INCH | 32 STUD THREAD |
|
|