|
|
|
National Stock Number:
5307-00-814-3872
Federal Supply Class:
5307
National Item Identification Number:
008143872
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 318815P3 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM AND 0.835 INCHES MAXIMUM NUT THREAD | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7456 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM AND 0.735 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2840 TO 0.2855 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|