|
|
|
National Stock Number:
5307-00-820-6353
Federal Supply Class:
5307
National Item Identification Number:
008206353
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| S8149H428-104 | 70210 | HONEYWELL INTERNATIONAL INC. | | S8149H428-104 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | S8149H428-104 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.076 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM FIRST HOLE | | OVERALL LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4150 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.437 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.343 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2290 TO 0.2310 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD QUANTITY PER INCH | 28 STUD THREAD |
|
|