|
|
|
National Stock Number:
5307-00-822-2676
Federal Supply Class:
5307
National Item Identification Number:
008222676
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| C406864-16 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 5.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-570,CL S1 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP O6 | | NOMINAL THREAD SIZE | 1.000 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 1.000 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD LENGTH | 1.500 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 1.750 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 8 STUD THREAD | | THREAD QUANTITY PER INCH | 8 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD PITCH DIAMETERS | +0.9237 TO 0.9288 INCHES STUD THREAD |
|
|