|
|
|
National Stock Number:
5307-00-843-2507
Federal Supply Class:
5307
National Item Identification Number:
008432507
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 99-583-08-2 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | 99-583-08-2 | 56705 | DONALLCO INC |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.125 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.688 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD PITCH DIAMETERS | +0.3425 TO 0.3449 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|