|
|
|
National Stock Number:
5307-00-848-6653
Federal Supply Class:
5307
National Item Identification Number:
008486653
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 6825525P006 | 24617 | GENERAL MOTORS CORP | | 6825525P006 | 63005 | ROLLS-ROYCE CORPORATION | | 6825525P006 | 73342 | ALLISON TRANSMISSION INC | | EMS85030 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.141 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL | | OVERALL LENGTH | 1.031 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD LENGTH | 0.453 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.484 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD PITCH DIAMETERS | +0.2935 TO 0.2950 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|