|
|
|
National Stock Number:
5307-00-929-6602
Federal Supply Class:
5307
National Item Identification Number:
009296602
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| AP118563 | 73808 | CONTINENTAL TIRE THE AMERICAS, LLC |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-107 FSCM 73808 MFR REF SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.938 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 24 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.641 INCHES MINIMUM NUT THREAD | | 0.438 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STRAIGHT KNURL 0.125 IN. OF THREAD STUD END | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 49.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73808 | | DESIGN CONTROL REFERENCE | AP118563 |
|
|