|
|
|
National Stock Number:
5307-00-930-0051
Federal Supply Class:
5307
National Item Identification Number:
009300051
Description:
STUD,SHOULDERED
Detail:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. ALL OR PART OF THE UNTHREADED SECTION HAS A CROSS-SECTIONAL DIAMETER GREATER THAN THE NOMINAL STUD SIZE PLUS 0.020 INCHES (0.508 MM). IT MAY BE THREAD RELIEVED. SEE ALSO STUD, LOCKED IN.
|
Manufacturer Information:
| C692-8-13-6 | 06725 | SPS TECHNOLOGIES, LLC | | C692-8-13-6 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | HL160-8-13-6 | 73197 | HI-SHEAR CORPORATION | | C692-8-13-6 | 81755 | LOCKHEED MARTIN CORPORATION | | C692-8-13-6 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL160-8-13-6 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 8740 OR | | STEEL COMP 4130 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDERED | | SHOULDER DIAMETER | 0.395 INCHES NOMINAL | | SHOULDER LENGTH | 0.082 INCHES NOMINAL | | NUT END SHANK LENGTH | 0.812 INCHES NOMINAL | | STUD END SHANK DIAMETER | 0.249 INCHES NOMINAL | | NUT END SHANK DIAMETER | 0.249 INCHES NOMINAL | | OVERALL LENGTH | 1.664 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD | | UNJF STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 28 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.395 INCHES MINIMUM NUT THREAD | | 0.359 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | HEX 0.095 IN. BY 0.140 IN. DEEP NUT END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73197 | | DESIGN CONTROL REFERENCE | HL160-8-13-6 |
|
|