|
|
|
National Stock Number:
5307-00-950-6063
Federal Supply Class:
5307
National Item Identification Number:
009506063
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| DD5282 | 81601 | NORFOLK NAVAL SHIPYARD |
|
Techincal Specification:
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 7.688 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 3140 | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | SPECIAL FEATURES | COUNTERBORE 0.375 IN. DIA BY 0.062IN. DEEP AND 0.125 IN. BY 60.0 DEG CENTER BOTH ENDS | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 1.000 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 1.125 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.5680 TO 0.5690 INCHES NUT THREAD | | THREAD PITCH DIAMETERS | +0.5860 TO 0.5885 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 11 STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD |
|
|