|
|
|
National Stock Number:
5307-00-983-0197
Federal Supply Class:
5307
National Item Identification Number:
009830197
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 9994094 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| OVERALL LENGTH | 4.940 INCHES MINIMUM AND 5.060 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1018 | | NOMINAL THREAD SIZE | 0.164 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.164 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD QUANTITY PER INCH | 32 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|
|