|
|
|
National Stock Number:
5307-00-984-8534
Federal Supply Class:
5307
National Item Identification Number:
009848534
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 6825525 | 24617 | GENERAL MOTORS CORP | | 6825525 | 63005 | ROLLS-ROYCE CORPORATION | | 6825525 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.141 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 1.031 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD LENGTH | 0.484 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.453 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|