|
|
|
National Stock Number:
5307-01-045-8440
Federal Supply Class:
5307
National Item Identification Number:
010458440
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| UH1491 | 12736 | CLAYTON MANUFACTURING COMPANY |
|
Techincal Specification:
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 4.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4142 | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD LENGTH | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.880 INCHES MINIMUM AND 1.000 INCHES MAXIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD QUANTITY PER INCH | 13 STUD THREAD | | THREAD QUANTITY PER INCH | 13 NUT THREAD |
|
|