|
|
|
National Stock Number:
5307-01-048-6182
Federal Supply Class:
5307
National Item Identification Number:
010486182
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 209-040-111-3 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP E4340 | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.775 INCHES MINIMUM AND 0.875 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.900 INCHES MINIMUM AND 1.000 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.4553 TO 0.4568 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 13 STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD |
|
|