|
|
|
National Stock Number:
5307-01-057-5705
Federal Supply Class:
5307
National Item Identification Number:
010575705
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 209-075-226-9 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 9.380 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 28 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 5.000 INCHES MINIMUM AND | | 5.180 INCHES MAXIMUM NUT THREAD | | 3.000 INCHES MINIMUM AND | | 3.180 INCHES MAXIMUM STUD THREAD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 209-075-226-9 |
|