|
|
|
National Stock Number:
5307-01-137-6805
Federal Supply Class:
5307
National Item Identification Number:
011376805
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 151370 | 08712 | PRINCE ALEXANDER PARTNERS INC DIV ARCHITECTURE ENGIEERING AND ECONOMIC DEVELOPMENT |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 304 OR STEEL COMP 304L | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | OVERALL LENGTH | 2.000 INCHES MINIMUM AND 2.031 INCHES MAXIMUM | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM STUD THREAD AND 0.593 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.875 INCHES MINIMUM NUT THREAD AND 0.906 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|