|
|
|
National Stock Number:
5307-01-151-6116
Federal Supply Class:
5307
National Item Identification Number:
011516116
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 4799849 ITEM 19 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6203101 ITEM 19 | 77408 | LOCKHEED CORP LOCKHEED SHIPBUILDING AND CONSTRUCTION CO |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.156 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.250 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 5.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY 400 | | NOMINAL THREAD SIZE | 1.000 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 1.000 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.625 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 1.625 INCHES NOMINAL STUD THREAD | | THREAD QUANTITY PER INCH | 8 NUT THREAD | | THREAD QUANTITY PER INCH | 8 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|