5307-01-156-8765, STUD,PLAIN

5307-01-156-8766 STANDOFF,THREADED,SPACING

National Stock Number:
5307-01-156-8765

Federal Supply Class:
5307

National Item Identification Number:
011568765

Description:
STUD,PLAIN

Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.

Manufacturer Information:

14028978	11862	GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
14028978	7X677	GENERAL MOTORS LLC

Techincal Specification:

HARDNESS RATING	27.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM
OVERALL LENGTH	50.5 MILLIMETERS MINIMUM AND 52.0 MILLIMETERS MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	G-500-M 9.8,FSCM 11862 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
NOMINAL THREAD SIZE	10.0 MILLIMETERS STUD THREAD
NOMINAL THREAD SIZE	10.0 MILLIMETERS NUT THREAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	G-4435-M CODE A,FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PHOSPHATE OVERALL
THREAD DIRECTION	RIGHT-HAND NUT THREAD
THREAD DIRECTION	RIGHT-HAND STUD THREAD
THREAD LENGTH	15.0 MILLIMETERS MINIMUM STUD THREAD
THREAD PITCH IN MILLIMETERS	1.50 NUT THREAD
THREAD PITCH IN MILLIMETERS	1.50 STUD THREAD
THREAD LENGTH	30.0 MILLIMETERS MINIMUM NUT THREAD
THREAD SERIES DESIGNATOR	M STUD THREAD
THREAD SERIES DESIGNATOR	M NUT THREAD
THREAD TOLERANCE CLASS	6G EXTERNAL NUT THREAD
THREAD TOLERANCE CLASS	6G EXTERNAL STUD THREAD

Click here to Register for Free 30-day Trial