|
|
|
National Stock Number:
5307-01-183-2266
Federal Supply Class:
5307
National Item Identification Number:
011832266
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.720 INCHES MINIMUM AND | | 1.760 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3404 TO 0.3417 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES NOMINAL NUT THREAD | | 0.750 INCHES NOMINAL STUD THREAD | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59875 | | DESIGN CONTROL REFERENCE | 217117-2 |
|
|