|
|
|
National Stock Number:
5307-01-198-1810
Federal Supply Class:
5307
National Item Identification Number:
011981810
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 810AS2198-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| OVERALL LENGTH | 10.500 INCHES MINIMUM AND 10.506 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | NOMINAL THREAD SIZE | 0.138 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.138 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE 4 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD LENGTH | 0.563 INCHES MINIMUM AND 0.687 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.563 INCHES MINIMUM AND 0.687 INCHES MAXIMUM STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD QUANTITY PER INCH | 32 STUD THREAD |
|
|