|
|
|
National Stock Number:
5307-01-274-0913
Federal Supply Class:
5307
National Item Identification Number:
012740913
Description:
STUD,WELDING
Detail:
A HEADED OR HEADLESS FASTENER EXTERNALLY OR INTERNALLY THREADED. IT IS INTENDED FOR FASTENING BY WELDING THE HEAD, UNTHREADED END OR WELDING TIP. IF HEADED, THE HEAD IS NOT DESIGNED TO BE SELF-HOLDING, NOR TO BE TURNED WITH A WRENCH OR INSERTED DRIVER, NOR DOES THE HEAD HAVE SMALL RAISED PROJECTIONS ON THE TOP OR UNDERSIDE TO FACILITATE WELDING. SEE ALSO BOLT, WELDING.
|
Manufacturer Information:
| M24149/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-24149 TY6 CL3 M0D | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-24149/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-24149/4 TY6 CL3 M0D | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILS24149/4TY6CL3M0D.175X1.437 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILS24149/4TY6CL3M0D.175X2.562 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY LENGTH | | HEAD DIAMETER | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | HEAD LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | LENGTH EXCLUDING FLUXED WELDING TIP | 2.562 INCHES NOMINAL | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 | | NONDEFINITIVE SPEC/STD DATA | 6 TYPE AND 3 CLASS | | SPECIAL FEATURES | LENGTH SHOWN IS BEFORE WELDING; NOTCHED END IN LIEU OF THREADED END,NOTCHED END 0.175 IN. MIN AND 0.180 IN. MAX DIA,0.312 IN. LENGTH | | STYLE DESIGNATOR | WELDING |
|
|