|
|
|
National Stock Number:
5307-01-280-8716
Federal Supply Class:
5307
National Item Identification Number:
012808716
Description:
STUD,WELDING
Detail:
A HEADED OR HEADLESS FASTENER EXTERNALLY OR INTERNALLY THREADED. IT IS INTENDED FOR FASTENING BY WELDING THE HEAD, UNTHREADED END OR WELDING TIP. IF HEADED, THE HEAD IS NOT DESIGNED TO BE SELF-HOLDING, NOR TO BE TURNED WITH A WRENCH OR INSERTED DRIVER, NOR DOES THE HEAD HAVE SMALL RAISED PROJECTIONS ON THE TOP OR UNDERSIDE TO FACILITATE WELDING. SEE ALSO BOLT, WELDING.
|
Manufacturer Information:
| M24149/1-544 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M24149/1/544 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM24149 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MIL-S-24149 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-24149/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FEATURES PROVIDED | HEAT SHIELD | | LENGTH EXCLUDING FLUXED WELDING TIP | 1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 4 CLASS | | SHOULDER DIAMETER | 0.625 INCHES MINIMUM AND 0.687 INCHES MAXIMUM | | SHOULDER LENGTH | 0.093 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | SPECIAL FEATURES | FURNISHED WITH ARC SHIELD OF HEAT RESISTANT CERAMIC | | STYLE DESIGNATOR | WELDING | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD LENGTH | 0.750 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | UNTHREADED END DIAMETER | 0.325 INCHES MINIMUM AND 0.335 INCHES MAXIMUM | | UNTHREADED END LENGTH | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
|
|