|
|
|
National Stock Number:
5307-01-292-1483
Federal Supply Class:
5307
National Item Identification Number:
012921483
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| A-CE9950-1 | 74841 | FRUEHAUF CORP FRUEHAUF TRAILER OPNS | | MWP7530 | 3YHS6 | WABASH NATIONAL TRAILER CENTERS, INC. |
|
Techincal Specification:
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.070 INCHES MINIMUM AND 3.030 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J429 GR 8 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.750 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.750 INCHES STUD THREAD | | SURFACE TREATMENT | ZINC AND CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.720 INCHES MINIMUM AND 0.930 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 1.590 INCHES MINIMUM AND 1.650 INCHES MAXIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.6806 TO 0.6850 INCHES NUT THREAD | | THREAD PITCH DIAMETERS | +0.6850 TO 0.6880 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 10 NUT THREAD | | THREAD QUANTITY PER INCH | 10 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|