|
|
|
National Stock Number:
5307-01-293-9586
Federal Supply Class:
5307
National Item Identification Number:
012939586
Description:
STUD,WELDING
Detail:
A HEADED OR HEADLESS FASTENER EXTERNALLY OR INTERNALLY THREADED. IT IS INTENDED FOR FASTENING BY WELDING THE HEAD, UNTHREADED END OR WELDING TIP. IF HEADED, THE HEAD IS NOT DESIGNED TO BE SELF-HOLDING, NOR TO BE TURNED WITH A WRENCH OR INSERTED DRIVER, NOR DOES THE HEAD HAVE SMALL RAISED PROJECTIONS ON THE TOP OR UNDERSIDE TO FACILITATE WELDING. SEE ALSO BOLT, WELDING.
|
Manufacturer Information:
| 3/8-16 UNCX1.000 IN LG COMP 316 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M24149/1-904 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-24149/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-24149/1-904 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-24149C | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM SHOULDER PORTION TO NUT END | 1.375 INCHES NOMINAL | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY MATERIAL | | MATERIAL | STEEL COMP 316 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 6 CLASS | | SHOULDER DIAMETER | 0.565 INCHES MINIMUM AND 0.688 INCHES MAXIMUM | | STYLE DESIGNATOR | WELDING | | WELD LEG LENGTH | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | UNTHREADED END DIAMETER | 0.325 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
|
|