|
|
|
National Stock Number:
5307-01-293-9967
Federal Supply Class:
5307
National Item Identification Number:
012939967
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 3F42111-101 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | OVERALL LENGTH | 9.700 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 CLASS 321 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 321 OR STEEL COMP 347 | | SPECIAL FEATURES | 0.072 IN. MIN,0.077 IN. MAX DIA HOLE DRILLED THROUGH NUT THREADS;CEN- TER OF HOLE IS 0.300 IN. FROM END | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 0.750 INCHES NOMINAL STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD QUANTITY PER INCH | 28 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|