|
|
|
National Stock Number:
5307-99-246-6240
Federal Supply Class:
5307
National Item Identification Number:
992466240
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| NO PRIMARY REF 99-246-6240 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M | | SL785/124 | K0192 | SPICER SPECIALITY AXLE DIVISION |
|
Techincal Specification:
| THREAD CLASS | 2A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.500 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 1.000 INCHES NOMINAL NUT THREAD | | THREAD PITCH DIAMETERS | +0.4675 TO 0.4712 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | OVERALL LENGTH | 1.844 INCHES MINIMUM AND 1.906 INCHES MAXIMUM | | SPECIAL FEATURES | 1/32IN. LG SHALLOW DOG POINT NUT END |
|