|
|
|
National Stock Number:
5307-99-739-0444
Federal Supply Class:
5307
National Item Identification Number:
997390444
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 3511-1172-001 | K0656 | BAE SYSTEMS (OPERATIONS) LIMITED |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE OR BS 970 GRADE 303S41 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.112 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.112 INCHES STUD THREAD | | OVERALL LENGTH | 2.155 INCHES MINIMUM AND 2.165 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-156 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD LENGTH | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD QUANTITY PER INCH | 40 NUT THREAD | | THREAD QUANTITY PER INCH | 40 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|
|