|
|
|
National Stock Number:
5310-00-060-9156
Federal Supply Class:
5310
National Item Identification Number:
000609156
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 361834-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 361834-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 440C OVERALL | | HARDNESS RATING | 52.0 ROCKWELL C MINIMUM AND | | 56.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.481 INCHES MINIMUM AND | | 0.486 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.900 INCHES MINIMUM AND | | 0.940 INCHES MAXIMUM | | RECESS DIAMETER | 0.554 INCHES NOMINAL | | RECESS DEPTH | 0.030 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.089 INCHES MINIMUM AND | | 0.091 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | SPECIAL FEATURES | SURFACE OPPOSITE RECESS CHAFERED 8 TO 12 DEGREES BY 0.023 IN. | | HEAT TREATMENT | ANNEALED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59364 | | DESIGN CONTROL REFERENCE | 361834-1 |
|
|