|
|
|
National Stock Number:
5310-00-060-9435
Federal Supply Class:
5310
National Item Identification Number:
000609435
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 004-003005-064 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 131050 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 131211 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | E108165 FIND N0 254 | 3X894 | CONTROL FLOW, INC. | | E108165 FIND NO 254 | 3X894 | CONTROL FLOW, INC. | | FFW84 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | WG105390 | 3X894 | CONTROL FLOW, INC. | | MS35338-55 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35338-55 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35338-36 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1060 OR | | STEEL COMP 1064 OR | | STEEL COMP 1065 OR | | STEEL COMP 1069 OR | | STEEL COMP 1070 OR | | STEEL COMP 1071 OR | | STEEL COMP 1074 OR | | STEEL COMP 1075 OR | | STEEL COMP 1078 OR | | STEEL COMP 1080 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 46.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | HOLE DIAMETER | 1.254 INCHES MINIMUM AND | | 1.272 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.028 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.312 INCHES NOMINAL | | NONDEFINITIVE SPEC/STD DATA | 1 STYLE AND | | A CLASS |
|