|
|
|
National Stock Number:
5310-00-067-8066
Federal Supply Class:
5310
National Item Identification Number:
000678066
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| GN10FG22 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 1.375 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 2014 OR | | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/4 FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-A-225/6 FED SPEC 2ND MATERIAL RESPONSE OR | | QQ-A-250/4 FED SPEC 2ND MATERIAL RESPONSE OR | | WW-T-700/3 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.110 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | NUT DIAMETER | 1.859 INCHES MINIMUM AND | | 1.891 INCHES MAXIMUM | | NUT THICKNESS | 0.328 INCHES MINIMUM AND | | 0.359 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.110 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 2 | | HOLE CONFIGURATION STYLE | CONFIGURATION G | | HOLE TYPE AND QUANTITY | 1 TAPPED | | HOLE NOMINAL THREAD DIAMETER | 0.138 INCHES | | HOLE THREAD QUANTITY PER INCH | 32 | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM AND | | 92.0 DEGREES MAXIMUM NUT | | SPECIAL FEATURES | THREE HOLES DRILLED ON BOTTOM SURFACE AT 45 DEG ANGLE TO OUTER PERIPHERY SPACED 120 DEG APART AND THREE HOLES DRILLED ON BOTTOM SURFACE AT 45 DEG ANGLE TO OUTER PERIPHERY SPACED 120 DEG APART | | SPECIFICATION/STANDARD DATA | 26512-GN10FG MANUFACTURERS STANDARD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 26512 | | DESIGN CONTROL REFERENCE | GN10FG22 |
|
|