|
|
|
National Stock Number:
5310-00-073-6601
Federal Supply Class:
5310
National Item Identification Number:
000736601
Description:
WASHER,SHOULDERED
Detail:
A WASHER, ROUND IN SHAPE, AND HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT AND UNBROKEN, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
|
Manufacturer Information:
| 114H4049-1 | 27541 | TRANSAERO, INC. | | 114H4049-1 | 33068 | TRIUMPH ACTUATION SYSTEMS - CONNECTICUT, LLC | | 114H4049-1 | 77272 | THE BOEING COMPANY | | 114H4049-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | ALUMINUM AND | | COPPER ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-679,/CANCELLED/ FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE FILM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDERED | | HOLE DIAMETER | 0.689 INCHES MINIMUM AND | | 0.691 INCHES MAXIMUM | | SHOULDER DIAMETER | 1.0615 INCHES MINIMUM AND | | 1.0635 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.175 INCHES MINIMUM AND | | 1.185 INCHES MAXIMUM | | SHOULDER HEIGHT | 0.042 INCHES MINIMUM AND | | 0.052 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.068 INCHES MINIMUM AND | | 0.088 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES TOP | | 32.0 MICROINCHES BOTTOM | | 32.0 MICROINCHES INNER | | TEST DATA DOCUMENT | 81205-114H4049 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | CRITICALITY CODE JUSTIFICATION | AAVH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77272 | | DESIGN CONTROL REFERENCE | 114H4049-1 |
|
|