|
|
|
National Stock Number:
5310-00-095-0738
Federal Supply Class:
5310
National Item Identification Number:
000950738
Description:
NUT,PLAIN,CAP
Detail:
AN ITEM INTERNALLY THREADED FROM ONE END, AND COMPLETELY INCLOSED ON THE OPPOSITE END. THE OUTER PERIPHERY PARALLEL TO THE THREADED AXIS MAY BE SQUARE, CYLINDRICAL, HEXAGONAL, OCTAGONAL, OR DODECAGONAL AND TAPER TO A CONE OR DOME SHAPE ON THE CLOSED END. FOR LIKE ITEMS WHICH ARE STAMPED OR FORMED FROM SHEET STOCK, SEE NUT (1), STAMPED. FOR SIMILAR ITEMS WHICH ARE FLAT ON TOP AND BOTTOM SEE NUT (1), SLEEVE OR POST, ELECTRICAL-MECHANICAL EQUIPMENT.
|
Manufacturer Information:
| 10031 | 45311 | PACIFIC AIRMOTIVE CORP | | 516015 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | COPPER ALLOY 360 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-611 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | CAP | | NUT HEIGHT | 0.330 INCHES MINIMUM AND | | 0.350 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.042 INCHES NOMINAL | | BEARING SURFACE TYPE | CHAMFERED OR | | WASHER FACED | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 45311 | | DESIGN CONTROL REFERENCE | 10031 |
|
|