|
|
|
National Stock Number:
5310-00-097-4633
Federal Supply Class:
5310
National Item Identification Number:
000974633
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| GN10FM50 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNJ | | NOMINAL THREAD SIZE | 3.125 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.110 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | NUT DIAMETER | 3.609 INCHES MINIMUM AND | | 3.641 INCHES MAXIMUM | | NUT THICKNESS | 0.328 INCHES MINIMUM AND | | 0.359 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.180 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 2 | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 6 DRILLED | | DRILLED HOLE DIAMETER | 0.045 INCHES NOMINAL | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT |
|
|