|
|
|
National Stock Number:
5310-00-172-4125
Federal Supply Class:
5310
National Item Identification Number:
001724125
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 305966 | 33654 | HOWDEN FLUID SYSTEMS | | 305966 | 58163 | MEGGITT (NORTH HOLLYWOOD), INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.453 INCHES MINIMUM AND 0.463 INCHES MAXIMUM | | OVERALL DIAMETER | 1.130 INCHES MINIMUM AND 1.140 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1025 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
|
|