|
|
|
National Stock Number:
5310-00-187-2425
Federal Supply Class:
5310
National Item Identification Number:
001872425
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 004-003005-001 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 004-003005-001 | 2M626 | AMERICAN FASTENER COMPONENTS INC | | 122-5486623 PC1 | 43689 | HUNTINGTON INGALLS INC | | FF-W-84 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | 5310001872425 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310001872425 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS35338-120 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35338-120 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY A OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | HOLE DIAMETER | 0.255 INCHES MINIMUM AND | | 0.263 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.489 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.062 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | MINIMUM TENSILE STRENGTH | 155000 POUNDS PER SQUARE INCH | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-84 |
|