|
|
|
National Stock Number:
5310-00-214-1052
Federal Supply Class:
5310
National Item Identification Number:
002141052
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 35-105111 | 70898 | BEECHCRAFT CORPORATION | | 35-105111-3 | 70898 | BEECHCRAFT CORPORATION | | 35-105111-3 | 7EK50 | TEXTRON AVIATION INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND E-4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.631 INCHES MINIMUM AND | | 0.643 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.062 INCHES NOMINAL | | RECESS DIAMETER | 0.765 INCHES MINIMUM AND | | 0.785 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.115 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 70898 | | DESIGN CONTROL REFERENCE | 35-105111-3 |
|
|