|
|
|
National Stock Number:
5310-00-230-4680
Federal Supply Class:
5310
National Item Identification Number:
002304680
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| K641222-11 | 84955 | KAMAN AEROSPACE CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.563 INCHES MINIMUM AND | | 0.565 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.875 INCHES NOMINAL | | MATERIAL THICKNESS | 0.190 INCHES NOMINAL | | TOP RECESS DIAMETER | 0.625 INCHES NOMINAL | | BOTTOM RECESS DIAMETER | 0.625 INCHES NOMINAL | | BOTTOM RECESS ANGLE | 100.0 DEGREES NOMINAL | | TOP RECESS ANGLE | 100.0 DEGREES NOMINAL | | TEST DATA DOCUMENT | 84955-KPS 208 RATING C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | HEAT TREATMENT | AS FABRICATED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 84955 | | DESIGN CONTROL REFERENCE | K641222-11 |
|
|