|
|
|
National Stock Number:
5310-00-232-0997
Federal Supply Class:
5310
National Item Identification Number:
002320997
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 3728-1003-1 | 04614 | TEXTRON SYSTEMS CORPORATION |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 0.877 INCHES MINIMUM AND 0.878 INCHES MAXIMUM FLANGE | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | FLANGE DIAMETER | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM | | FLANGE THICKNESS | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE NOMINAL THREAD DIAMETER | 0.250 INCHES | | HOLE THREAD QUANTITY PER INCH | 28 | | HOLE TYPE AND QUANTITY | 2 TAPPED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1040 OVERALL | | NOMINAL THREAD SIZE | 0.875 INCHES | | NUT COUNTERBORE DEPTH | 1.545 INCHES MINIMUM AND 1.565 INCHES MAXIMUM FLANGE | | NUT DIAMETER | 1.253 INCHES MINIMUM AND 1.257 INCHES MAXIMUM | | NUT LENGTH | 2.675 INCHES MINIMUM AND 2.695 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | FLANGE HOLES ARE 88.0 TO 92.0 DEG APART | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 14 |
|
|