|
|
|
National Stock Number:
5310-00-234-8915
Federal Supply Class:
5310
National Item Identification Number:
002348915
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 4N21441-101A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | ROUND BOSS | | CROSS-SECTIONAL SHAPE | ROUND NUT | | CROSS-SECTIONAL SHAPE | ROUND W/SPLINES FLANGE | | FLANGE THICKNESS | 0.526 INCHES MINIMUM AND 0.556 INCHES MAXIMUM | | FLANGE WIDTH ACROSS FLATS | 1.750 INCHES MINIMUM AND 1.770 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD SIZE | 0.625 INCHES | | NUT DIAMETER | 1.050 INCHES MINIMUM AND 1.070 INCHES MAXIMUM | | NUT LENGTH | 2.074 INCHES MINIMUM AND 2.094 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3B | | THREAD LENGTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM OVERALL | | THREAD SERIES | UNJF | | THREAD QUANTITY PER INCH | 18 |
|
|