|
|
|
National Stock Number:
5310-00-235-6216
Federal Supply Class:
5310
National Item Identification Number:
002356216
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 68A112300-2001 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| HOLE DIAMETER | 0.316 INCHES MINIMUM AND 0.323 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,COND H FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL THICKNESS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | RECESS ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM | | RECESS DIAMETER | 0.395 INCHES MINIMUM AND 0.415 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS13101 CLASS 2,TYPE 2,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|