| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.000 INCHES NOMINAL |
| COUNTERBORE DIAMETER | 0.290 INCHES MINIMUM NUT |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.500 INCHES NOMINAL |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATERIAL | ALUMINUM ALLOY 7075 WASHER |
| MATERIAL | STEEL NUT |
| MATERIAL | STEEL SHELL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| NUT COUNTERBORE DEPTH | 0.135 INCHES MINIMUM NUT |
| NUT HEIGHT | 0.753 INCHES MAXIMUM |
| NUT STYLE | PLATE |
| NUT LENGTH | 1.250 INCHES NOMINAL |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| PLATE THICKNESS | 0.018 INCHES NOMINAL |
| PLATE WIDTH | 0.668 INCHES MAXIMUM |
| SPECIAL FEATURES | MOLDED SEAL,RUBBER,MIL-R-6855,CL 1,SHORE DUROMETER A60 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT | ANODIZE OR CHROMATE WASHER |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | CADMIUM SHELL |
| TEMP RATING | -80.0 FAHRENHEIT MINIMUM AND 250.0 FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES | UNF |