|
|
|
National Stock Number:
5310-00-253-1096
Federal Supply Class:
5310
National Item Identification Number:
002531096
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 16075D | 31007 | NAVISTAR INTL CORP | | 16075D | 89346 | NAVISTAR INTL CORP TRUCK BR OHIO PLANT | | 47009 | 13841 | TIFFIN PARTS, L.L.C. | | 64050 | 22593 | FITZGERALD GASKET A CO OF TANNETICS INC | | 24451 | 79150 | DANA AUTOMOTIVE SYSTEMS GROUP, LLC | | 16075D | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | V8263 | 0B0B1 | MAHLE AFTERMARKET INC. | | 8263 | 79144 | VELLUMOID, INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | MATERIAL | | | PERIPHERAL SHAPE STYLE | ROUND | | MINIMUM TENSILE STRENGTH | 1800 POUNDS PER SQUARE INCH | | OVERALL DIAMETER | 0.875 INCHES NOMINAL | | THICKNESS | 0.031 INCHES NOMINAL |
|
|