|
|
|
National Stock Number:
5310-00-261-7156
Federal Supply Class:
5310
National Item Identification Number:
002617156
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 10372544 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5310002617156 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 824637-13 | 56232 | LOCKHEED MARTIN CORPORATION | | MS35333-78 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | FF-W-100 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | 5310002617156 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS35333-78 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | HOLE DIAMETER | 0.512 INCHES MINIMUM AND | | 0.530 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.867 INCHES MINIMUM AND | | 0.900 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.037 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND | | A GRADE AND | | 1 STYLE AND | | 2 COMPOSITION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-100 |
|