|
|
|
National Stock Number:
5310-00-261-7423
Federal Supply Class:
5310
National Item Identification Number:
002617423
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 1736-00-00 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS | | 43W6814-700 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 936A1616C | 53397 | NUMAX ELECTRONICS INC | | MS35333-83 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | 6E16 | 89749 | CLARK MATERIAL HANDLING COMPANY | | MS35333-83 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | HOLE DIAMETER | 1.019 INCHES MINIMUM AND | | 1.060 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.590 INCHES MINIMUM AND | | 1.637 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.059 INCHES MINIMUM AND | | 0.067 INCHES MAXIMUM |
|