5330-00-291-4497 WASHER Index 5330-00-291-4499 O-RING

National Stock Number:
5310-00-291-4498

Federal Supply Class:
5310

National Item Identification Number:
002914498

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
186178816764GENERAL MOTORS CORP DELCO REMY DIV
18617881LW55BORGWARNER PDS (ANDERSON), L.L.C.
186178824617GENERAL MOTORS CORP
186178861928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
186178872582ROLLS-ROYCE SOLUTIONS AMERICA INC
186178880072H20 TANK INC U S MOTORS DIV
191308016764GENERAL MOTORS CORP DELCO REMY DIV
19130801LW55BORGWARNER PDS (ANDERSON), L.L.C.
191308024617GENERAL MOTORS CORP
41SX15145152OSHKOSH CORP
191308061928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
191308072582ROLLS-ROYCE SOLUTIONS AMERICA INC
41SX15175Q65OSHKOSH DEFENSE LLC
1913080D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
7F352511083CATERPILLAR INC
A06013858275SASCO INC CANADIAN DIV
7205195097LITTLE GIANT CRANE AND SHOVEL INC
5310002914498A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
7F-3525HD208PON EQUIPMENT B.V.
5310002914498SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE


Techincal Specification:
MATERIALPLASTIC OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.207 INCHES MINIMUM AND
0.211 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.386 INCHES MINIMUM AND
0.390 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.047 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us