|
|
|
National Stock Number:
5310-00-291-9869
Federal Supply Class:
5310
National Item Identification Number:
002919869
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0224148-7 | 92392 | ALLIS-CHALMERS CORP | | 12432D | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | 214886 | 24617 | GENERAL MOTORS CORP | | 2148861 | 24617 | GENERAL MOTORS CORP | | 14A397 | 56442 | DIAMOND REO TRUCK CO | | 214886 | 7X677 | GENERAL MOTORS LLC | | T56-10 | 06840 | BENDIX CORP THE | | 606098 | 24617 | GENERAL MOTORS CORP | | 342207 | 65282 | WHITE MOTOR CORP | | T56-10 | 72260 | CORBITT CO INC | | T56-10 | 76126 | BENDIX CORP THE FRICTION MATERIALS DIV | | T56-10 | 79960 | ZENITH FUEL SYSTEMS LLC | | 2148861 | 7X677 | GENERAL MOTORS LLC | | 224148 | 92392 | ALLIS-CHALMERS CORP |
|
Techincal Specification:
| MATERIAL | CELLULOSE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-12803,TYPE 3,NO. P3200-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.500 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.750 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.039 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | MINIMUM TENSILE STRENGTH | 6000 POUNDS PER SQUARE INCH |
|
|