|
|
|
National Stock Number:
5310-00-297-4569
Federal Supply Class:
5310
National Item Identification Number:
002974569
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 6718609 | 24617 | GENERAL MOTORS CORP | | 6718609 | 63005 | ROLLS-ROYCE CORPORATION | | EMP1885 | 24380 | EMPIRE MFG CO INC | | 6718609 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| MATERIAL | RUBBER SYNTHETIC AND | | CORK OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-6183,CL 2,GR MEDIUM MIL SPEC ALL MATERIAL RESPONSES OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.867 INCHES MINIMUM AND | | 0.873 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.630 INCHES MINIMUM AND | | 1.635 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.062 INCHES NOMINAL | | HARDNESS RATING | 60.0 SHORE DUROMETER A MINIMUM AND | | 75.0 SHORE DUROMETER A MAXIMUM |
|
|