5310-00-297-6107, WASHER,FLAT

National Stock Number:
5310-00-297-6107

Federal Supply Class:
5310

National Item Identification Number:
002976107

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

10388	33844	KLAUER MANUFACTURING COMPANY
2019	05415	LINDE LIFT TRUCK CORP.
2019	12603	CLARK EQUIPMENT CO
2019	23926	KOMATSU AMERICA INTL CO
2019	36384	FMC CORP LINK-BELT DIV
2019	556A6	LINDE MATERIAL HANDLING NORTH AMERICA CORP
P12739	04285	ATHEY PRODUCTS CORP
8B4159	11083	CATERPILLAR INC
851626	12603	CLARK EQUIPMENT CO
51139	33844	KLAUER MANUFACTURING COMPANY
V1NC2019	40152	VME AMERICAS INC SUB OF VME GROUP N V
851626	89749	CLARK MATERIAL HANDLING COMPANY
2019	89749	CLARK MATERIAL HANDLING COMPANY
2019	99832	SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC
V2019	12603	CLARK EQUIPMENT CO
V2019	40152	VME AMERICAS INC SUB OF VME GROUP N V
VINC2019	40152	VME AMERICAS INC SUB OF VME GROUP N V
VINC2019	77237	DANA OFF HIGHWAY PRODUCTS, LLC
V1NC2019	77237	DANA OFF HIGHWAY PRODUCTS, LLC
V2019	77237	DANA OFF HIGHWAY PRODUCTS, LLC
V2019	89749	CLARK MATERIAL HANDLING COMPANY

Techincal Specification:

MATERIAL	CORK AND
	RUBBER SYNTHETIC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-6183 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.698 INCHES MINIMUM AND
	0.708 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	1.258 INCHES MINIMUM AND
	1.268 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.278 INCHES MINIMUM AND
	0.293 INCHES MAXIMUM
HARDNESS RATING	60.0 DUROMETER MINIMUM AND
	70.0 DUROMETER MAXIMUM

Click here to Register for Free 30-day Trial