|
|
|
National Stock Number:
5310-00-301-3282
Federal Supply Class:
5310
National Item Identification Number:
003013282
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 728997-101 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| RECESS DIAMETER | 0.339 INCHES MINIMUM AND | | 0.353 INCHES MAXIMUM | | RECESS DEPTH | 0.028 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.043 INCHES NOMINAL | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.273 INCHES MINIMUM AND | | 0.283 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.492 INCHES MINIMUM AND | | 0.502 INCHES MAXIMUM | | OVERALL HEIGHT | 0.038 INCHES MINIMUM AND | | 0.048 INCHES MAXIMUM |
|
|